Face shield holder

Thankfully, in these times where we can't help, we can help!
The hospitals are in need of equipment. Our nurses, doctors and volunteers need our help!

If you have a 3D printer, you can print facial shield holders which are actually really useful to all who are close to our infected fellow humans!

One suggestion: https://www.thingiverse.com/thing:4240920
Several other suggestions: https://www.facebook.com/groups/1205752362782946/files/

Let's help!







Comments

Post a Comment

Popular posts from this blog

Anet A8 Filament changing upgrade

Image
At first, changing the filament was always a nightmare with this printer. The so called "cold pull"... Not too quick, not too slow... Well, it jammed more than it worked. So... I've done the following upgrade, making it easy to access the extruding block. It's basically a hinge with a magnetic lock. The contact between the heat sink and the extruder block is still guaranteed and the heat dissipation is practically as it was before the upgrade.
Read more

Update on the Sun F(ol)lower

Image
The Sun F(ol)lower had an upgrade: It has a new, dedicated board. It simplifies the cabling a lot, and makes it quicker to (dis)assemble. As is, this board can be used as a prototyping board for reading 4 sensors (analogic input) of 10kOhm (to complete the voltage divider) and control 2 digital outputs. What's next: Now that the main board is up and running, the project can move to the next stage: -Improving the algorithm for light sensitivity in various light conditions; -Add a solar panel; -Redesign the structure to hold the servo motors, solar pannel, sensors and all the components.
Read more

Simple altimeter Oled display

Image
Altimeter using a BMP 085 atmosferic pressure sensor and an Oled display SSD1306 128x32. This is a really simple example using two I2C devices. I've used bits and pieces from the example sketches from the devices libraries. More about connections and code here: https://github.com/LCLLajas/Simple-altimeter-with-oled-display
Read more